Boric acid role in different Cutting fluids in CNC End Milling by Measuring Surface Roughness

Author(s):

Pravin Atmaram LAd , Government College of Engineering, Amravati ; M.J.Deshmukh, Government College of Engineering, Amravati

Keywords:

Boric Acid, Cutting Fluid, Lubricant, Machining, Quality

Abstract:

Since the past years various manufacturing operations which includes the machining of metals uses various types of collants and lubricants which are composed of chemicals and other polluants factors. This collants and lubricants which are used, very dangerous and hazardous to the nature and human. This operations includes manufacturing operations like turning, milling, drilling, forming and grinding, forming, sheet métal operations etc. heat generated in the cutting zone results into bad work piece quality and more tool wear. Hence there is need to find and use the alternative coolants and lubricants which will reduce the hazards machining cost and other cost and, factors. In this paper boric acid is mixed with different oils coconut oil, soluble oil and potassium chloride and this mixture is used as cutting fluid and experimentation was done and performance was calculated and results are compared with the conventional and cutting oil without boric acid. Based on the experimental data we can say that boric acid and coconut oil showed that using better performance. New coolants potassium chloride is used in this project that gives more weightage.

Other Details:

Manuscript Id	:	IJSTEV1I10066
Published in	:	Volume : 1, Issue : 10
Publication Date	:	01/05/2015
Page(s)	:	194-198

Download Article