VLSI implementation of the DWT based Arrhythmia Detection Architecture using Co-Simulation

Author(s):

Vipin Sharma , Hindustan College of Science and Technology, Mathura; Manish kumar arya, Hindustan College of Science and Technology, Mathura

Keywords:

ECG, VLSI, DWT

Abstract:

The main objective of this work is to get the exact ECG signal using different methodologies. The main focus of this work is to remove the interferences present in the ECG signal. Filters are used to remove the interferences present in the cardiac signal. Co-simulation is used to check the response of the signal in real time system. Filters are designed to remove the interferences such as power line with 60 Hz and baseline wander with 0.5 Hz. Co-simulation is the important task in this work because of the filter designing. High pass filter and low pass filters are used to remove the noises using Biorthogonal DWT technique. Biorthogonal DWT is one of the accurate methods to remove the interferences because of zero side lobes. The basic objective is to calculate the R-R wave interval in QRS complexes with heart rate measurement and also finds the R peak location.

Other Details:

Manuscript Id	:	IJSTEV2I10204
Published in	:	Volume : 2, Issue : 10
Publication Date	:	01/05/2016
Page(s)	:	792-800

Download Article