Study Effects of Parameters on Surface Roughness in Turning Process by using Analysis Of Variance (ANOVA
Author(s):
Mr. Meetkumar Gajjar , Chotubhai Gopalbhai patel institute of technology; Mr. Jignesh Gadhiya, Chotubhai Gopalbhai patel institute of technology
Keywords:
ANOVA, Full Factorial, Surface Roughness, Turning, ASTM A29 Grade 1020 Mild Steel, HSS (High Speed Steel)
Abstract:
Turning is a widely used machining operation to produce various components. The finished component depends not only on the dimensional accuracy but also on the surface finishing. In the present work we get some relation between input parameter and output parameter by using Analysis of variance (ANOVA) method. Here ASTM A29 Grade 1020 mild steel is used as a work piece and high speed steel (HSS) is used as cutting tool. Our work determines that, the input parameter like cutting speed, depth of cut (DOC) and feed rate has some contribution in surface roughness, that contribution will help us to know about significant factor and that relation with surface roughness, that contribution and significant parameter we determine by the statistical analysis of variances. The number of experiment to be conducted is decided from the full factorial design of experiment method. As per factorial design of experiment method, 27 experiments were conducted.
Other Details:
| Manuscript Id | : | IJSTEV2I12167
|
| Published in | : | Volume : 2, Issue : 12
|
| Publication Date | : | 01/07/2016
|
| Page(s) | : | 325-328
|
Download Article
